Would a thinner rubber wood finger joint be better?

Nowadays,veneer has been widely used in industries such as furniture,automotive lighting,wooden flooring,and decorative engineering.Because there are many types of wood veneer,their thickness varies during the production process.The commonly used veneer thickness at present is 0.5mm,which is also widely used.

However,due to the significant increase in cash and raw materials,in order to effectively reduce costs,many manufacturers have made wood veneer thinner and thinner.The use of wood veneer thickness ranging from 0.1-0.3mm is also very common.Especially in types of wood veneer,such as sourwood veneer,ebony veneer,and rosewood veneer.

Woodskin and other materials are usually made of thin leather,which accounts for the majority of applications.

Furniture decorative panels,artificial boards,etc.with low regulations,and for light colored wood veneer,the thinner it is used,the higher the probability of leakage and glue penetration when resin veneers are used.Seriously affecting the actual effect of resin veneers.Handmade veneer is mainly made with a thickness of 0.2-0.3mm.In order to facilitate the handmade edge sealing,

Enhance the flexibility of the wood veneer.Usually,a layer of non protective cloth or packaging paper is pasted on the surface of the wooden veneer.Also known as unprotected fabric veneer and packaging paper veneer.That way,the veneer won't crack easily.Mechanical equipment is mainly covered with wood veneer with a thickness of 0.4-0.5mm,which is pressed together at high temperatures.Through again